probe-type
pressure sensors and transmitters
MP 1X series
MP 1X Series – Probe-type pressure sensors and transmitters
MP 1X series are small diameter high-stability (water/liquid level) probe-type pressure transducers with an integral 4 to 20 mA signal conditioner to automatically compensate for line resistance and power supply fluctuations. The sensor utilizes high reliability bulk type semiconductor strain gauges which are bonded directly to the inside surface of a machined diaphragm. The transducer and electronics package are housed in corrosive resistant titanium (Ti 6Al4V) body.
With a diameter of only 9.53 mm (0.375 inches), the MP 102 can easily be installed into holes with diameters as small as 12 mm (0.5 inch). Transducers are available with cable length up to 300 m (1000 feet); with splicing, greater lengths are possible.
This product is available with an internal hermetic seal which dramatically increases reliability and accuracy. At the cable exit, titanium armor is provided to improve the cable pull strength while maintaining a water seal. A moisture insulator located near the end of the cable is available and eliminates inter-conductor condensation. All cables are double-jacketed for extra protection.
Please contact us for non-standard pressure ranges.
Key features
The MP 100 / MP 101 and MP 102 are:
- Small diameter
- Corrosion resistant
- Highly stable
- High output signal
Applications
- Ground water level
- Tank liquid level
- Water and liquid pressure
- Liquid level profiling
MP 100
MP 100
Input 0-10V, DC or AC; Relative, Absolute or Sealed Reference
MECHANICAL
Standard Pressure Ranges: 1-20 bar
Other ranges possible contact us
PERFORMANCE
Balance (Zero): ±5 mV
Full Scale Sensitivity: 10±5 mV/V
Static Error Band: ± 0. 5% F.S. (BFSL), max.
Long Term Stability: < 0.1% F.S. per year. (options)
ENVIRONMENTAL
Storage and Operating Temperature, standard: -54 °C to +93 °C
Extended Temperature Range: -54°C to +95 °C
High Temperature Version: -54°C to +250 °C
Acceleration: 100g any axis (high vibrations option)
Media Compatibility: Titanium 6AL4V
PTFE coated option
Other coating options (water, hydrocarbon, bio-fluid repellent, etc.)
ELECTRICAL
Input, constant Voltage Excited: 0-10 V DC or AC
Maximum Voltage (short periods): 30 V
view-download
MP 101
MP 101
Input 0-8 mA, DC or AC; Relative, Absolute or Sealed Reference
MECHANICAL
Standard Pressure Ranges: 1-20 bar
Other ranges possible contact us
PERFORMANCE
Balance (Zero): ±5 mV
Full Scale Sensitivity: 12.5±5 mV/mA
Static Error Band: ± 0.5% F.S. (BFSL), max.
Long Term Stability: < 0.1% F.S. per year. (options).
ENVIRONMENTAL
Storage and Operating Temperature, standard: -50 °C to +93 °C
Extended Temperature Range: -54°C to +95 °C
High Temperature Version: -54°C to +250 °C
Acceleration: 100g any axis (high vibrations option)
Media Compatibility: Titanium 6AL4V
PTFE coated option
Other coating options (water, hydrocarbon, bio-fluid repellent, etc.)
ELECTRICAL
Input, constant Current Excited: 0–8 mA DC or AC
Maximum Voltage (short periods): 30 V
view-download
MP 102
MP 102
Input 12-32 V, DC or AC; Relative, Absolute or Sealed Reference
MECHANICAL
Standard Pressure Ranges: 1–20 bar
Other ranges possible contact us
PERFORMANCE
Balance (Zero): 4±0.8 mA
Full Scale Sensitivity: 16±0.8 mA
Static Error Band: ± 0.5% F.S. (BFSL), max.
Long Term Stability: < 0.1% F.S. per year. (options).
ENVIRONMENTAL
Storage and Operating Temperature: -54°C to +93 °C
Extended Temperature Range: -54°C to +95 °C
High Temperature Version: -54°C to +250 °C
Acceleration: 100g any axis (high vibrations option)
Media Compatibility: Titanium 6AL4V
PTFE coated option
Other coating options (water, hydrocarbon, bio-fluid repellent, etc.)
ELECTRICAL
Input, constant Voltage Excited: 24 V DC
Maximum Voltage (short periods): 12-32 V DC or AC